Call Now
Toll Free
Skip Navigation LinksWelcome
Send to a Friend
Your Name
Your Email
Friend`s Name
Friend`s Email
Your Message
Send Message

At Breathe Easy Eco Solutions, we are dedicated to providing a healthy indoor environment free of moulds, fungi, bacteria, viruses and mildew. We are the only company in North America to use exclusively eco-friendly products to treat indoor environments contaminated with these allergens and pathogens.

Our Canadian Environmental Choice products contain no harsh chemicals and are derived from sustainable botanical sources. We use only food-grade essential oils and botanical enzymes to treat indoor air quality issues. Our services are chemical free, environmentally sound, and based on techniques regularly used for the same purposes in Europe.

Proud members of the Better Business Bureau since 2009
Institute of Inspection, Cleaning and Restoration Certified Certified by the Institute of Inspection Cleaning and Restoration (IICRC)
Certified by the International Association of Certified Home Inspectors Certified by the World's largest Home Inspection Organization
IAC2 Mold Certified International Association of Certified Indoor Air Consultants (IAC2) Certified Mould Inspectors
Air Miles Sponsor Now offering AIR MILES® Reward Miles
Letters to
My New Home is Mouldy!
View Full Story Minimize
October 15, 2013 | DrMould

I recently purchased a brand-new house in a very upscale neighbourhood.

I recently purchased a brand-new house in a very upscale neighbourhood. The basement was unfinished but it was insulated, with a vapour barrier covering the insulation. I wanted to put in another electrical outlet, so I removed some of the vapour barrier and when I removed the insulation, I found mould growing back there. How could this happen in a brand new house?


Dear Dismayed,

There are two main reasons why you found mould behind the insulation in a new house and both are related to the Building Code.

First, The Code requires that the basement be insulated prior to the new homeowner taking possession of the house. Oftentimes this means that the concrete foundation may be dry, but it is not cured and still may contain significant moisture that will evaporate into the open space between the foundation walls and the insulation. The insulation and vapour barrier makes it difficult for this moisture to disperse into the basement air, so there it sits. Any mould spores present, find it much to their liking and growth occurs.

The second issue is that it is quite difficult to seal the air-vapour barrier in the floor joist header area. The Code does not specify how this should be done, so builders sometimes staple or do not even seal the vapour barrier at all. This leaves gaps in the vapour barrier where warm moist air from the basement can make its way through to the cold foundation walls and condense. Again, this provides a very suitable environment for mould growth.

Most of the time, The Code is your friend, but not in this case, as you have discovered. The solution to your issue is to remove the vapour barrier and the existing insulation. This should be done by professionals if there is more than just a little mould. The basement should be sprayed with an eco-friendly anti-mould agent and then completely dried out using a good dehumidifier. Then new, mould-resistant insulation must be installed. Please do not use the old insulation as it has been corrupted with mould spores. Finally, an intact and properly sealed vapour barrier is a must to avoid future problems.

Thanks for your question.

How to Choose an "Expert"
View Full Story Minimize
September 11, 2013 | DrMould

I am excited to be asking you your first question. You’ll always remember YourFirst.

Anyway, my question is what sets mould remediation companies apart?

I am excited to be your first question. You’ll always remember YourFirst.

Anyway, my question is what sets mould remediation companies apart? There are maybe 50 of them in the local phonebook. How do I choose between them?


Dear YourFirst,

Thank you for your question. Most so-called ‘mould remediation’ companies do not specialize in mould. If you look at their web sites, you can see they do all sorts of remediation and restorations. From smoke and fire to floods and leaky basements, they do it all. They do air quality, they build rec rooms, they restore paintings.

One local fellow owns a home inspection service. He inspects homes for leaky windows, he inspects fireplaces, he investigates roofs and eavetroughs, and everything else… and guess what? He even detects mould as part of his overall “home inspection”. He also owns a number of individual businesses. He repairs windows. He services fireplaces. He replaces roofs and eavestroughs. Oh, and he remediates mould! Each of his businesses has its own name and website. What an expert he must be!

Find a company that specializes in mould remediation. They should detect, kill and remove mould period, and they should have been in business for at least five years. Those are the true mould experts. The certification process is wide open and generally meaningless in Canada so make sure they are registed with the Better Business Bureau. Never hire a guy with a hand lettered sign and no business cards, and avoid any company who tells you that you need their service beyond remediating mould.

Thanks for asking,

Read All Articles